HA Inspectors Course

Accredited course.
Delivered over 5 days.
Emphasis on the accurate conduction of audits.

Next Course

Date
22-07-2019 to 26-07-2019

Where
Brisbane

View All Course Dates
Limited seats available

Hazardous Areas Inspectors

Course Description

Volt Edge has now developed a National Recognised Inspectors course, which is a course designed to allow a Hazardous Area Electrician to:
→ Be authorised at a particular site as an Inspector.
→ Used as technical back up for the QLD Hazardous Areas Auditors application.
OR
→ Used at technical back up for the Victorian H class inspectors course and application.

Content Delivery

This is a 5 day face to face course with a mix of practical and theory. The person, when deemed competent, should be able to inspect previous completed a detailed inspection of a hazardous area installation and then create an auditable document list of non compliances and which clause in the Australian Standards that is required.

Outcomes

After successful completion of this course, students will have the skills to:
→ Verify hazardous classification for the area.
→ Select and check equipment, wiring and accessories.
→ Design system and installation.
→ Audit hazardous areas documentation (verification dossier).
→ Prepare to audit as-built installation.
→ Establish and implement procedures for maintaining explosion-protection.

View All Course Dates

Looking for something more tailored to your needs? We also provide specialised onsite training, just call us 1300 761 366

Skills obtained

Compiling Verification Dossier

Learn to compile, manage and assess a Hazardous Area Verification Dossier against the requirements

Design

Pair workplace protocols and creative initiative to methodically design and produce various projects

Documentation

Compile and produce appropriate documentation of work operations.

Audit Compliance Reports

Learn to document, compile and report audit findings. Upskill and become a QA/QC specialist.

Unit Of Competenencies
Pre-Requisites
Costs
Additional Information

Unit of Competencies

Unit Code

Unit Name

UEENEEM054A

Plan Electrical installations of hazardous areas – gas.

UEENEEM056A

Plan Electrical installations of hazardous areas – pressurisation.

UEENEEM057A

Design explosion-protected electrical systems and installations – gas.

UEENEEM059A

Design explosion-protected electrical systems and installations – pressurisation.

UEENEEM065A

Conduct audit of hazardous areas installations – gas atmospheres.

UEENEEM078A

Manage compliance of hazardous areas.

Pre-Requisites

Unit Code

Unit Name

UEENEEM054A

Granting competency in this unit shall be made after or concurrently with confirming competency in any one of the following units: UEENEEM024A Install explosion-protected equipment and wiring systems gas atmospheres OR Competencies in planning general electrical/instrumentation installations at AQF4 or equivalent. Examples are (but not limited to): UEENEEG125A Plan electrical installations with a low voltage demand up to 400 A per phase, UEENEEI112A Verify compliance and functionality of instrumentation and control installations.

UEENEEM056A

Granting competency in this unit shall be made after or concurrently with confirming competency in any one of the following units: UEENEEM026A Install explosion-protected equipment and wiring systems pressurisation OR Competencies in planning general electrical/instrumentation installations at AQF4 or equivalent. Examples are (but not limited to): UEENEEG125A Plan electrical installations with a low voltage demand up to 400 A per phase, UEENEEI112A Verify compliance and functionality of instrumentation and control installations.

UEENEEM057A

Granting competency in this unit shall be made after confirming competency in designing electrical systems and installations at AQF level 6 or equivalent. Examples are (but not limited to): UEENEEE115A Develop design briefs for electrotechnology projects, UEENEEG130A Design switchboards rated for high fault levels (greater than 400 A), UEENEEI123A Design electronic control systems.

UEENEEM059A

Granting competency in this unit shall be made after confirming competency in designing electrical systems and installations at AQF level 6 or equivalent. Examples are (but not limited to): UEENEEE015B Develop design briefs for electrotechnology projects UEENEEG130A Design switchboards rated for high fault levels (greater than 400 A), UEENEEI123A Design electronic control systems.

UEENEEM065A

Granting competency in this unit shall be made after or concurrently with confirming competency in engineering auditing/evaluation AQF 5 or equivalent. Examples are (but not limited to): UEENEEG131A Evaluate performance of low voltage electrical apparatus OR UEENEEG060B Evaluate performance of LV electrical machines.

UEENEEM078A

Granting competency in this unit shall be made after or concurrently with confirming competency in general plant management at AQF 4 Example are (but not limited to): PMASUP410 Develop plant documentation.

Costs

$ 2,800 (GST Free).

Additional Information

The course can be done by Engineers or Electricians with a background in Hazardous Areas to be able to inspect other tradesmen’s hazardous area work to Australian Standards.

Essential Knowledge

Knowledge of an Australia Standards is important, although the student will receive particular information from the below standards:
→ AS/NZS 60079.14:2017 Part14 Design selection, erection and initial inspection.
→ AS/NZS 3000 2018 Wiring Rules.

If you want to download a flyer for this course, click here.

Our Trainers

Mark Harvey
Being a Hazardous Areas specialist, Mark has 10+ years’ experience with engineering of Hazardous Areas.

Tony McKewin
As the Managing Director (and owner), Tony has 25+ years’ experience in both the mining and LNG industries. He has been training EEHA and HV since 2009. Tony is the Author of the Training material.